Biasa Network Logo

Linux Corner

Writer Corner

How to treat the CD and DVD Blue Ray

CD dan DVD
Compact Disk (CD) has become a commonly used storage media for storing data temporarily and can be carried easily or as well as portable media, backup data storage media.


Although somewhat altered function of the CD with the DVD, HD-DVD and even Blu-Ray, but the fourth storage medium still has almost the same quality, the difference only lies in the capacity penyimpannya. DVD, HD-DVD and Blu-Ray's larger capacity than CDs. But how to use / storage / treatment remains the same.


Here are tips caring for CDs and DVDs:


1. Note the color of the reflector layer

CDs and DVDs so that when written and read no problem, you are encouraged to find a CD / DVD pemantulnya silver lining (silver) or slightly golden. You should never choose a colorful reflectors (blue, red, let alone black). Because of this reflective layer plays a role in reading data from CD / DVD that has been written. CD / DVD colorful possibilities no constraints when writing (write) the CD / DVD burner, but there likely will be difficult when read.


2. Under Maximum Speed Fuel

Burn (burn) CD / DVD that you purchased listed below the maximum velocity at the burner software (Nero, Roxio, etc.). Never trust about the maximum speed is written on the label CD / DVDs. Because even though the written 52x, but seringkal been analyzed by CD / DVD burner through the burner software, usually writes the value it will come down. For readings kompatibiitas needs, select burning speed 10x/12x course-although this will impact on the time of the combustion process. In addition, it also can anticipate when the CD / DVD proficiency level in these devices will be read from the CD / DVD ROM with the specifications read (read) is lower still widely used.


3. Do Until Full Field Data

Try not to when a full charging data, give an empty space (free space) a few mega bytes.


4. Save In Special Plastic

After the burn / read, try the CD / DVD saved into a special plastic to avoid dust or scratches. Save CD / DVD, dry and dark place, make sure do not damp or exposed to direct sunlight because it will damage the surface of the reflector so that the CD / DVD hard to read.


5. Do not be Pressured

Do not write labels CD / DVD, make a point with a permanent marker on the label.


6. Notice the clean mode

Before input to try to read CD / DVD cleaned of dust and use a soft cloth used to clean glasses. Avoid using rudimentary tissue or shirt to clean it, this is to avoid the appearance of scratches on the disk that is causing the CD / DVD is unreadable.